
Extract the files to the desktop.

Click on the desktop icon to run the program.

Enter the default password:  BRGprecision

When the clocks are first connected to the network, they will attempt to automatically acquire an IP address using DHCP.
To discover and configure PoE clocks, enter the first three octets of the IP address.  The fourth digit can be any number, e.g. 192.168.45.1.  The
program will scan all 255 addresses in the subnet 192.168.45 even if your PC is located on another subnet.

The clock is configured with a list of public NTP time servers.  These IP addresses can be changed to local or other public time servers.

The IP addressing defaults to DHCP for automatic address assignment.  This can be changed to a static IP address assignment.

Daylight saving rules should be changed to reflect the rules at your location, or uncheck to disable DST.

Select the time zone offset from UTC (GMT).

The clock can optionally be configured to blank the display to conserve power using the Energy saving selection.

Select the desired clock display intensity.

Click on the Modify button to implement changes.


